technical data sheet ssmc right angle jack 38K202-302E3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to iso 2768 m-h interface according to en 122 180, iec 60169-19 documents assembly instruction 35 c1 material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m, over nickel outer contact brass gold, min. 0.8 m, over nickel body brass gold, 0.1 m min. coupling nut beryllium copper gold, min. 0.15 m, over chemical nickel dielectric ptfe crimping ferrule copper gold, 0.1 m min.
technical data sheet ssmc right angle jack 38K202-302E3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 ? frequency dc to 6 ghz return loss 28 db, dc to 1 ghz 25 db, 1 to 3 ghz 23 db, 3 to 6 ghz insertion loss 0.1 x db insulation resistance 1x10 3 m ? center contact resistance 5 m ? outer contact resistance 2.5 m ? test voltage 500 v rms working voltage 175 v rms rf-leakage 70 db up to 1 ghz - limitations are possible due to the used cable type - mechanical data mating cycles 500 center contact captivation 8 n coupling test torque 0.3 nm recommended coupling torque 0.2 to 0.23 nm tensile strength of coupling mechanism 100 n environmental data temperature range -55c to +155c climatic class iec 60068-2-1 55/155/21 iec 60068-2-2 iec 60068-2-3 vibration iec 60068-2-6 10 hz to 500 hz, 98m/s2 tooling crimping tool 11w150-000 crimp insert 11w150-102 suitable cables rg 316 /u, rg 174 a/u, rg 188 a/u packing standard 1 pce in bag weight 1.4 g/pce draft date approved date rev. engineering change number name date inge mhlauer 28/09/04 rong fang 02/11/05 b00 05-0567 inge mhlauer 02/11/05 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be co nstrued as recommendation to infringe exis ting patents. in the effort to improve ou r products, we reserve the right to ma ke changes judged to be necessary.
|
